Datasheet LS040

Show-Scan-Module LS040 with mirror parallel shifting With the new X-Y-Z Scan Module LSK have launched a unique product onto the market with regard to capacity and size. The new revolutionary driver electronics with Big Jump Compensation 'BJC' permits a notable speed increase. The BJC regulation permits a speed increase of approx. 80% with a small deflection angle and suppresses any overshooting. By optimum matching of the BJC driver electronics to the known fast LSK scanners a spot velocity is achieved which is unsurpassed in this quality. In practice this means: for the projection of complex graphics and animation, rounded corners or an overshooting large leaps are a thing of the past the pictures can be moved with higher scan frequencies the optical impression of the picture quality is considerably better. The mirrors used are designed for a capacity of up to 1 kW per cm2 in the visible laser light range. The module is made ready to install and supplied already compensated - of course in the known LSK quality. Technical data: Deflection angle: X-Y optically in deg. max. 40, Z adjusted for beam diameters in mm max. 2 Rise time: X-Y with an angle of 3 deg in ms 0.25, 40 deg in ms 0.60                 Z parallel shifting (on/off) in ms 0.25 Input voltages (driver signal): X-Y-Z in V +/-10 Power supply: 220/240 VAC 0.5 A, 110/120 VAC 0.8 A Driver coil fuses: X-Y-Z, ampere slow blow 3.15 Mains fuses: ampere slow blow 0.5 / 0.8 Weight: kg 2.9 Please state the local voltage when ordering! Two versions are at your disposal: Model LS 040 with mirror blanking (parallel shifting) Model LS 040 only 2 axes (X and Y) for external RGB-Blanking The mirrors used are designed for a capacity of up to 1 KW per cm2 in the visible light range. Modules are supplied ready to install and are compensated and come in the usual high LSK quality as a matter of course. When ordering, please state required voltage!